Cell Counter Reagents for Hematology Analyzer MINDRAY BC-5000 BC-5150 BC-5140 ( with barcode ) Manufacturer in
China
Intended Use of CBC reagentsTo be used for blood cell counting, sizing, and WBC
differentiation, hemoglobin determination on Mindray BC-5000
BC-5150 BC-5140 hematology analyzers. This product is for In Vitro
Diagnostic use only.Specification of CBC reagents
| Reagents on Mindray BC-5000 BC-5150 BC-5140 ( with barcode ) |
| Cat. No | Description | Pack Size |
| DWX-50228 | DILUENT-BC52 | 20L |
| DWX-50229 | LYSE-52DIFF | 500mlx4 |
| DWX-50230 | LYSE-52LH | 100mlx4 |
| DWX-50231 | RINSE-BC5 | 50ml |
Will the quality of CBC reagent change with different temperature?
Normal weather change will not affect the use of the product. If
the reagents freeze for low temperature, returning it to room
temperature make the ice melt completely and the products can be
used normally. Ensurind the ice melt completely otherwise it may
cause blockage. The store temperature of hematology reagents is
2-35 degrees, and the biochemical reagents require 2-8 degrees, if
not the validity of products will shorten.
Limitations of Detection Method
If the temperature of the reagent is out of the specified range,
the specimen's measurement parameters may appear abnormal. If in
this condition, please confirm the measurement parameters with the
microscopy method. Please refer to the instrument operation manual
for details.
Storage
The product should be stored in 2℃-35℃ and the storage period is 2
years. After opening the bottle, it is used in 15℃-30℃, and the
validity period is 60 days.
Attention
1. This product is an in vitro diagnostic reagent;
2. Pay attention to seal and prevent pollution;
3. Read the instructions carefully before use, and should stop
using them when they exceed the period of validity;
4. If the product freezes, it should be completely defrosted at
room temperature and used after mixing.
5. Waste liquid, waste, residual products and treatment of
contaminated packaging materials, please comply with local
regulations;
6. It is strictly forbidden to eat and avoid contact with eyes and
skin. Once Contact your eyes and skin,please clean immediately with
plenty of water and seek medical advice.
Some product questions you may want to ask:
1) What are the reagents of hematology Analyser?
At present, hematology analyzers on the market can be divided into
3 part hematology analyzers and 5 part hematology analyzers.
Hematology reagents are also indispensable in the use of hematology
analyzer. Hematology reagents include hemolytic agents, diluents,
cleaning solutions and concentrated cleaning solutions.
2) What is the diluent in the hematology analyzer?
The diluent for the hematology analyzer comprises sodium chloride,
sodium sulfate, a phosphate buffer agent, ethylene diamine
tetraacetic acid, 1-pyridone-2-sulphur and formaldehyde, and the pH
value of the solution is 6.5-7.4, and preferably is 7.2; the
content of each component is preferably as follows: 5g/L of ...
3) Which diluent is good for RBC and platelet counting?
For this, the blood specimen is diluted (usually in 1:200 ratio)
with the help of RBC diluting fluid (commonly the Hayem's Fluid)
which preserve and fix the Red blood cells. The Hayem's fluid is
isotonic to the Red blood cells and does not cause any damage to
it.
4) What is the use of Lyse in hematology analyzer?
It is used to lyse (destroy) red blood celis for hemogiobin
determinations or aid in the counting of white blood cells.
Applicable to the hematology analyzers.
5) What is the composition of Lyse for hematology analyzer?
The lytic reagent composition comprises a short chain alkyl
oxyethanol selected from the group consisting of 2-methoxyethanol,
2-ethoxyethanol, 2-propoxyethanol, and 2-isopropoxyethanol in a
sufficient amount to preserve leukocytes; a non-lysing nonionic
surfactant as a debris solublizer; and an inorganic buffer to ...
6) Which of the following combination of reagents is used to
measure hemoglobin?
This is done by adding both potassium cyanide and ferricyanide
whose absorbance is then measured at 540 nm using a photoelectric
colorimeter against a standard quality control solution. The Hb
concentration is then determined by the result produced by the
photoelectric colorimeter.
7) What is the principle of 3 part hematology analyzer?
In a 3-part analyzer the cell counting is based on the Coulter
Principle. All hematology analyzers utilise Coulter's Principle.
3-part differential cell counter employs Coulter's Principle to
determine the size as well as volume of the cells. Coulter's
principle is applied employing two electrodes.
8) What is a particle cell counterand analyzer reagent?
A variety of reagents that are designed for some cell counters and
analyzer that optimize instrument setup, sample preparation and
quality control.